Tools - Click Here Archives - Venture Cycles & Scooters

Bafang Programming cable

Venture Scooters — Fri, 09 Dec 2022 21:32:26 +0000

All of our motors are sent out programmed to suit each customer but if you really want to change something or have a motor with the factory settings then you’ll need this cable to make programming changes.

The post Bafang Programming cable appeared first on Venture Cycles & Scooters.

12 Volt Cordless Tyre Pump

Venture Scooters — Mon, 28 Nov 2022 05:27:03 +0000

Checkout this great new product. We’ve tested these in our workshop & they’ve proven very handy & reliable. Comes with a range of adapters to work with both valve types & will pump up the rugby & netballs as well.
Charging is done via a USB PORT or 12volt outlet from your car etc.
Maximum pressure is realistically 100psi.
Easy to read digital display with different options.
12 month warranty

The post 12 Volt Cordless Tyre Pump appeared first on Venture Cycles & Scooters.

ULTIMATE 4 X SPECIAL TOOL COMBO

Venture Scooters — Sun, 27 Dec 2020 08:05:49 +0000

ULTIMATE SPECIAL TOOL COMBO

Why not buy all the tools you need & save some money. These are all the special tools you need to convert most bikes. This package includes the heavy duty 1/2” drive socket that will definitely get the main motor mounting nut tight enough, the double ended spanner that is mainly used to tighten the second motor lock nut, the crank puller which you will need again for on going maintenance & bottom bracket remover. If you’re not sure what tools you need then contact us & we’ll work out what’s essential.
The tools supplied may vary from the pictures. The crank puller & bottom bracket remover will always be NZ sourced quality tools but brand may change depending on supply

The post ULTIMATE 4 X SPECIAL TOOL COMBO appeared first on Venture Cycles & Scooters.

Motor Servicing Tool for BBSO2B & BBS01B

Venture Scooters — Thu, 09 Apr 2020 08:27:28 +0000

You’ll need this tool to remove the axle & dismantle the 350watt, 500watt & 750watt BBS01B & BBSO2B motors. These motors are relatively straightforward to overhaul & this tool will let you do it.

The post Motor Servicing Tool for BBSO2B & BBS01B appeared first on Venture Cycles & Scooters.

Bottom Bracket Removal Tool

Venture Scooters — Mon, 06 Apr 2020 21:23:42 +0000

BOTTOM BRACKET REMOVAL TOOL

This tool is essential if you are doing the conversion yourself & will fit most bottom brackets. It is a high quality Park brand tool which is necessary as some bottom brackets can be difficult to remove. Remember when removing bottom brackets that both sides turn FORWARDS to undo. The left hand side is a right hand thread & the right hand side is a left hand thread.

The post Bottom Bracket Removal Tool appeared first on Venture Cycles & Scooters.

Crank Removal Tool

Venture Scooters — Mon, 06 Apr 2020 21:15:09 +0000

DOING THE CONVERSION YOURSELF?

You will need this tool to remove the cranks from bikes that have a square bottom bracket axle & the early splined bottom bracket axles.

It is essential for ongoing maintenance of your Venture conversion kit

The post Crank Removal Tool appeared first on Venture Cycles & Scooters.

Bafang Motor Installation Tool

Venture Scooters — Mon, 06 Apr 2020 21:09:33 +0000

BAFANG MOTOR INSTALLATION TOOL
This tool tightens the main motor mounting nut & lock nut. Make installing the motor & general maintenance a lot easier

PLEASE NOTE IF YOU WANT TO GET THE MAIN MOUNTING NUT PROPERLY TIGHT THEN YOU WILL NEED THE 1/2” DRIVE INSTALLATION SOCKET. IN OUR OTHER LISTINGS. (The motor will continue to come loose if you only use this black spanner)

The post Bafang Motor Installation Tool appeared first on Venture Cycles & Scooters.

Bafang Motor Outer Nut Installation Tool

Venture Scooters — Fri, 03 Apr 2020 20:13:04 +0000

Motor mounting nuts need to be done up really tight to avoid the motor coming loose & dropping down causing damage. This special socket takes a 1/2” bar so you can get some real torque into it.

This tool is for the outer lock nut that goes over the main motor nut. Also a great tool for removal & installation of outboard threaded bottom bracket systems.

Suitable for BBS01B. BBSO2B & BBSO3B 1000w
ALSO THE BEST TOOL FOR INSTALLING CYC BOTTOM BRACKETS

The post Bafang Motor Outer Nut Installation Tool appeared first on Venture Cycles & Scooters.

Bafang Motor Main Nut Installation Tool

Venture Scooters — Fri, 03 Apr 2020 20:11:36 +0000

Motor mounting nuts need to be done up really tight to avoid the motor coming loose & dropping down causing damage. This special socket takes a 1/2” bar so you can get some real torque into it.

This tool is for the main motor nut that goes up against the motor mounting plate. Probably the most important tool for these motors.

Suitable for BBS01B. BBSO2B & BBSO3B HD1000w

The post Bafang Motor Main Nut Installation Tool appeared first on Venture Cycles & Scooters.

Venture folding bike workshop stand

Venture Scooters — Tue, 28 Mar 2023 08:16:35 +0000

Perfect for the home bike mechanic or to take to an event. They are strong enough to hold most e bikes & are fully adjustable to hold any shaped bike. They are lightweight & fold to go out of the way when not being used. There’s a handy tool tray to help save you some time & a front wheel brace to hold the steering straight while you do your thing.

The post Venture folding bike workshop stand appeared first on Venture Cycles & Scooters.